smartlock ®
From conventional to angle-stable – the Evolution of Anchorage. Von konventionell zu winkelstabil – die nächste Generation der Verankerung.
Der Vorteil einer winkelstabilen Verbindung bei kieferortho- pädischen Behandlungen mit MA(R)PE MA(R)PE – M iniscrew A ssisted ( R apid) P alatal E xpansion (Minischrauben-gestützte Gaumennahterweiterung) Im orthopädischen/biomechanischen Kontext bezieht sich der Begriff „winkelstabil“ auf eine Implantatfixierungsme - thode, bei der die Schraube so in der Platte verriegelt wird, dass der Winkel zwischen Schraube und Platte fixiert und stabil ist. Es gibt kein „Wackeln“ oder Mikrobewegungen an dieser Schnittstelle. Da diese Schrauben-Platten-Verbindung starr ist, widersteht die Konstruktion Bewegungen (axial, Biegung, Rotation bes- ser. Studien zeigen, dass winkelstabile Konstruktionen eine höhere Primärstabilität (weniger Bewegung der Fragmente) im Vergleich zu herkömmlichen Schrauben/Systemen bie - ten. Bei Knochen minderer Qualität (posteriorer Gaumen- bereich) reduzieren winkelstabile Konstruktionen das Risiko einer sekundären Dislokation. Die smartlock ® BENEfit ® DIRECT TADs verfügen über zwei verschiedene Gewinde im Schraubenkopf und im Knochen- gewinde, wodurch verhindert wird, dass das System auf das Zahnfleisch drückt und die Blutversorgung weniger beein - trächtigt wird. Selbst wenn die TADs nicht in einem 90°-Win- kel zur Platte platziert werden, bleibt die Stabilität erhalten, da eine Abweichung von bis zu 15° toleriert wird. Vorteile: ▪ Es können kürzere Schrauben verwendet werden. 11 mm ist eine gängige Größe ▪ Keine unerwünschte Bewegung an der Verbindungsstelle Platte/Schraube ▪ Apparatur wird leicht nach oben gehoben und drückt nicht auf die Schleimhaut ▪ Es wird keine zusätzliche dentale Abstützung benötigt ausser bei Hybrid Hyrax ® ▪ Keine Verbindung Platte/Schraube mit Komposit oder ähnlichem Material notwendig
The advantage of an angle-stable connection in Orthodontic treatments with MA(R)PE MA(R)PE – M iniscrew A ssisted ( R apid) P alatal E xpansion In an orthopaedic/biomechanical context, the term “angle- stable” refers to an implant fixation method in which the screw is locked into the plate in such a way that the angle between the screw and the plate is fixed and stable. There is no “wobbling” or micro motion at the interface. As this screw-plate interface is rigid, the construct resists movement (axial, bending, rotational) better. Studies show that angle-stable constructs provide higher primary stability (less movement at fragments) compared with conventional screws/devices. In bones with poor quality (posterior region of the palate) angle-stable constructs reduce risk of seconda- ry displacement. The smartlock ® BENEfit ® DIRECT TADs feature two different threads in the screwhead and the bone thread which pre- vents the device to be pressed to the gingiva causing less disturbance of the blood supply. Even if the TADs are not placed in a 90° angle to the plate the stability is maintained as it tolerates a deviation of up to 15°. Benefits: ▪ Shorter screws can be used. 11 mm is a common size. ▪ No unwanted movement at the plate/screw connection point. ▪ The appliance is slightly elevated and does not press on the mucous membrane. ▪ No additional dental support is needed except with Hybrid Hyrax ® . ▪ No bonding of the plate/screw connection with composite or similar material is necessary.
CONVENTIONAL SCREWS
Video
BENEfit ® DIRECT
PSM BENEfit ® DIRECT MA (R) PE
6
Powered by FlippingBook